Set up your spread
Build your trolling program rod by rod, port and starboard. Every rod carries its exact tackle: line type and test, snap weight, diver, size, dial setting and ring.
Marked them at 40 feet? TrollAI tells you exactly how much line to let out for the tackle on that rod: your line, your diver, your dial setting. Then it learns from every pass you run.

The exact-tackle prediction, a PR0BE pass that recalibrates a rod, the big-type spread screen, and “Hey TrollAI” with a fish on. Seventy-five seconds, sound on.
Animated film. The boat shows a TrollAI wrap concept, and the phone screens are recorded from the real app. The probe pass is simulated demo data from the tour.
“How much line do I let out?” Every troller asks it a hundred times a season.
Manufacturer dive charts are a starting point, measured on one line, at one speed, in one set of conditions. Your boat isn't running that setup. You're on 20 lb mono or 30 lb braid, a #1 Dipsy with a ring dialed to 1.5, a 2 oz snap weight, trying to stay just above suspended walleye riding the thermocline.
Guess wrong and your spoons and stickbaits spend the morning above the fish, or bounce bottom and foul. TrollAI turns the guessing into a number you can trust, and a spread that stays on target as the morning goes on.
Build your trolling program rod by rod, port and starboard. Every rod carries its exact tackle: line type and test, snap weight, diver, size, dial setting and ring.
Choose the depth you want to fish and calculate. TrollAI matches your tackle against real dive data and shows the confidence, the method, and the readings behind every prediction.
When a PR0BE tracker comes up, review the dive and apply it to its rod. Your own readings count ten times as much as chart data, so predictions tighten up for the gear you actually run.
Watch TrollAI run the real app on a phone, tap by tap: predicting line out, syncing PR0BE passes, recalibrating, and keeping every rod on 40 feet.
Recorded on the real TrollAI app. The PR0BE passes in this video come from a test build and are simulated; the line outs and recalibrations are what the app calculated from them.
TrollAI keys every prediction to the full setup on the rod. When it has an exact match on real dive data, it says so. When it has to interpolate between readings, it tells you that too, with a confidence score and the readings it used.

Clip a PR0BE depth and temperature tracker ahead of the lure. When it surfaces, TrollAI syncs the pass over Bluetooth, draws the full dive curve with water temperature, and suggests the depth the lure settled at. Confirm it, fine-tune it, and apply it to the rod.
When the boat's rocking and your hands are full of planer board line, the spread view shows every rod's target and line out in type you can read from the stern. Flip it for bow or stern, swap saved programs with a tap, and keep your hands on the rods.

Serious crews and charter captains can log their own readings by tackle configuration and see the depth curve, average speed and spread of every setup they run. Share a package with the community, or start from one another angler already built.

From a light Dipsy program in June to lead core and snap weights in the fall, TrollAI handles the combinations that matter on big water.
Line out from real dive data for your full tackle setup, with the confidence and method shown every time.
PR0BE passes show where the lure really ran, so you stop trusting a chart written for someone else's rig.
Every pass you apply makes the next prediction better, and older readings fade slowly as the season changes.
TrollAI is in private beta on Android. Watch the tour to see a full morning's spread, from the first pass to the last.